background image

44

5 Maintenance

If the descaling operation is interrupted, there may be damage to 
the machine.

T

   Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces 
(e.g. marble), damage cannot be ruled out.

T

   Clean up any splashes immediately.

 

E

The descaling programme lasts approximately 45 minutes.

 

E

JURA descaling tablets are available from specialised dealers.

Precondition: 

The start screen is displayed. 

‘Decalcify machine’

 is 

displayed.

T

  Touch 

‘Decalcify machine’

.

‘Descale’

T

  Touch 

‘Descale’

.

T

  Touch 

‘Start’

.

T

  Touch 

‘Start’

 again.

‘Empty drip tray’

T

  Empty the drip tray and coffee grounds container and put 

them back into the machine.

‘Pour descaling agent into water tank’

T

  Remove and empty the water tank.

T

  Completely dissolve 4 JURA descaling tablets in a receptacle 

holding 800 ml of water. This may take several minutes.

T

  Pour the solution into the 

empty

 water tank and insert it 

into the machine.

‘Press the Rotary Switch’

T

  Place one receptacle under the dual spout and another 

under the hot-water spout.

T

  Press the Rotary Switch.

‘Machine is being descaled’

, water flows straight into the 

drip tray and out of the hot-water spout and dual spout 
repeatedly.
The operation is interrupted, 

‘Empty drip tray’

.

CAUTION

CAUTION

Summary of Contents for 748

























































Reviews: