34
4 Permanent settings in programming mode
T
Move your finger across the display until
‘Save energy’
is dis-
played in the centre.
T
Touch
‘Save energy’
.
‘Save energy’
T
Now move your finger across the controller and set it to
‘0’
.
T
Touch
‘Save’
.
‘Saved’
appears briefly on the display.
‘Save energy’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
In the programme item
‘Machine settings’
/
‘Lock/enable’
you can
disable/enable the following settings:
U
‘One-off settings’
: One-off settings can be made
during
preparation
(e.g. coffee strength or amount of water).
U
‘Expert mode’
: You can access the product settings by touch-
ing a product for approximately 2 seconds.
U
‘Rotary Selection’
:
Product selector view
with additional
products can be started by turning the Rotary Switch.
U
‘Alarm displays’
: The start screen displays messages such as
‘Clean machine’
or
‘Clean the milk system’
.
Example:
Proceed as follows to prevent
one-off settings
being
made during preparation.
Precondition:
The start screen is displayed.
T
Touch
‘ P ’
.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Machine settings’
T
Press the Rotary Switch.
‘Switch off after’
T
Turn the Rotary Switch until
‘Lock/enable’
is displayed.
T
Press the Rotary Switch.
‘Lock/enable’
T
Touch
‘One-off settings’
.
‘One-off settings’
Enabling and disabling
functions
