Rev A
Page 17
JA10-070 Audio Controller - Ten Transceiver with RX Volume Control
SECTION 3 – OPERATION
3.1
Introduction
This section contains the operating instructions for the JA10-070.
Note
: The JA10-070 USER 2 controls are on an optional separate control panel, and can be found in the
JCP3-x01 manual.
3.2
USER 1 Front Panel Controls
Note
: The legends and deadfront annunciator may be ordered with custom markings. The controls will be
referred to by the default legend and annunciator names as shown below.
1. Transceiver RX audio select switches, TX select annunciators and associated legends
2. Individual RX volume controls.
3. Receiver audio select switches and associated legends
4. Receive master volume control
5. EMER legend
6. Transmit and Emergency mode selector
7. Music/configuration input connector
8. Transmit annunciator (deadfront)
9. VOX/ICS volume control