13
Building-in instructions
Dimensions of the recess
Height of housing mm 880
Depth of housing mm 550
Width of housing
mm 560
The appliance’s door has been locked in position
for transport by means of pins on both sides. Ac-
cording to the door opening direction, remove rel-
evant pins at the top and at the bottom.
For appropriate venting, follow indications in Fig. 1.
Fig. 1
Push appliance into the housing until stop strip (A)
touches the kitchen unit.
Fig. 2
D028
min.
cm
2
200
50-min. cm
2
200
A
D022
If after having carried out the operation described in
section 2 there is still some space left between the ap-
pliance and the kitchen unit, fit the trimming provided
together with the appliance on the stop strip (A).
Fig. 3
Open the door and push the appliance against the
side of kitchen furniture opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent grill (C) and
hinge cover (D) into position.
Fig. 4
Press in the joint covers between the appliance and
the kitchen furniture.
Fig. 5
D265
A
D130
C
D
D128
