12
INSTALLATION
If this model, equipped with a magnetic door lock,
replaces an old appliance with a catch, ensure that
the latter cannot be used before discarding it to
prevent children being trapped inside.
Positioning
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct sun-
light etc.; best performance is obtained with ambient
temperature b16
°
C and +32
°
C.
Electrical connection
Before plugging in, ensure that the voltage and fre-
quency shown on the serial number plate correspond
to your domestic power supply. Voltage can vary by
±
6% of the rated voltage.
The appliance must be earthed.
The power supply cable plug is provided with a con-
tact for this purpose. If the domestic power supply
socket is not earthed, connect the appliance to a sep-
arate earth in compliance with current regulations,
consulting a specialist technician.
The Manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with E E.C. directive number
87/308 of 2.6.87 relative to radio interference suppres-
sion.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibil-
ity Directive) and subsequent modifications.
Cleaning the inside
Before using, clean all inside parts with warm water
and neutral soap to remove the typical new smell. Dry
thoroughly. Do not use abrasive detergent or powders
as these can damage the finish.
