JUNO JB096B2, User Manual, Page: 29 / 72

Before the Pyrolysis:
Turn off the oven and
wait until it is cold.
Remove all accessories. Clean the oven floor and the in‐
ner door glass with warm wa‐
ter, a soft cloth and a mild de‐
tergent.
Step 1
Set the function: . - flashes.
Step 2
, - press to set the cleaning mode.
Option Cleaning mode Duration
P1 Light cleaning 1 h
P2 Normal cleaning 1 h 30 min
Step 3
- press to start the cleaning.
Step 4 After cleaning, turn the knob for the heating functions to the off position.
During the cleaning the oven lamp is off. The oven door stays locked. When the oven is
cold, the door unlocks.
When the oven is at the set temperature, the door locks. Until the door unlocks the display
shows: the bars of the heat indicator, . To stop cleaning before it is completed, turn the knob
for the oven functions to the off position.
When the cleaning ends:
Turn off the oven and
wait until it is cold.
Clean the cavity with a soft
cloth.
Remove the residue from the
bottom of the cavity.
Cleaning reminder
The oven reminds you when to clean the
oven with: pyrolytic cleaning.
PYR - flashes in the display for 10 sec
after each activation and deactivation of
the oven.
, - press at the same time to turn off
the reminder.
How to remove and install: Door
The oven door has three glass panels. You can remove the oven door and the internal
glass panels to clean them. Read the whole "Removing and installing door" instruction
before you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
29