1.5mm
66mm
79mm
123mm
123mm
16mm
3mm
3mm
5
TP Screw (2.3x8mm)
Ply (15x15x3mm)
5
Epoxy plies inside the fuselage under the cowing and
mount the cowing with TP screw as illustration.
Epoxy plies inside the fuselage under the cowing and
mount the cowing with TP screw as illustration.
10
TP Screw (2.3x8mm)
Ply (15x15x3mm)
10
1.5mm
1.5mm
Marked
112mm
35mm
6
TP Screw (3x10mm)
Copper part
2
Ply (15x15x3mm)
4
Assemble the cowling.
Fix the canopy with self - tapping screws.
Drill holes to the marked position in the fuselage,
Drill holes relevant position in the stabilizers.
Assemble the stabilizer strut by TP serew.
Trim slots in right position in the bottem wing.
Epoxy the dummy flaps to the wings.
61
62
63
64
65
12
60
TP Screw (2.3x12mm)
Assemble the flap servo to the main wing with screws.
Main wing joiner 2
A
A"
A = A"
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Epoxy main wings to the centre wing by main wing
joiners.
Main wing joiner
2
8
4
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
16
TP Screw (2.3x12mm)
1
Rib template (2mm ply)
2
Wood dowel (6x30mm)
Fix the aileron servo to the serve tray with epoxy.
Fix the flap servo to the servo tray with epoxy.
Assemble the aileron servo to the wing with screws
as below.
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
According to the rib template drill holes to another
main wing.
2
Wood dowel (6x30mm)
1
Rib template (2mm ply)
6mm
Rib template (2mm ply)
Rib template (2mm ply)
6mm
1
2
3
4
5
1
Accessory list for the coming installation steps.
