Juniper WLA532, Hardware Documentation

Page: 34 / 43

is the primary installation method, however, you can also install the WLA532 access
point on the wall using a specially ordered wall-mounting bracket. You can purchase a
wall-mount kit at http://www.juniper.net/techpubs/ .
The WLA532 access point wall-mount package includes a bracket for mounting the
access point to a wall socket.
Ensure that you have the following parts and tools available to install the access point:
•
Wall-mount bracket (provided)
• Category 5 cable, installed (not provided)
• two screws (provided)
•
standard flat-head screwdriver (not provided)
•
(Optional) Security kit (separately orderable), which includes a security tool and a
security screw (not provided)
To install the access point on the wall socket:
1.
Hold the wall-mount centered over the wall socket and insert and secure the two
screws through the bracket into the wall using a standard flat-head screwdriver.
2.
Plug in the Category 5 cable from the wall socket to the access point.
3.
Align the access point with the wall bracket and push down until you hear the access
point click into place. Be sure the device is seated correctly in the wall bracket by
gently pulling up then down on the access point.
37 Copyright © 2011, Juniper Networks, Inc.
Installing the Access Point