c.
Remove the mounting template and the material you cut from the ceiling tile.
3.
Run the Category 5 cable from the ceiling through the hole in the ceiling tile.
4.
Ensure the snaps on the top of the ceiling-mount bracket are open so that the clips
can fully extend to fit around the ceiling rail. The bracket is shipped in an open position
so that it is ready to be clipped over a ceiling rail.
5.
If the bracket is closed, open the snaps by pressing in and up with your thumbs on
both sides of the snaps on the bottom of the bracket until it is fully open.
6.
With the bracket clips fully extended, align the clips with the rail and hook the clips
around the top sides of the rail. Push in on the sides of the bracket until the clips lock
over the rail. Listen for a clicking sound that indicates that the clips have locked. Be
sure the bracket has locked securely onto the rail by gently pulling down on the bracket
before installing the wireless LAN access point (WLA).
Copyright © 2011, Juniper Networks, Inc.
34
WLA 532 Access Point Hardware Documentation
Summary of Contents for WLA532
