Juniper SSG 20-WLA, Hardware Installation And Configuration Manual

Page: 16 / 82

SSG 20 Hardware Installation and Configuration Guide
6 „
Front Panel
See “Connectors” on page III for the RJ-45 connector pinouts.
Mini Physical Interface Module Port Descriptions
Each mini physical interface module (PIM) supported on a device has the following
components:
„ One cable connector port—Accepts a network media connector. Figure 3 shows
the available mini PIMs. You can install up to two mini PIMs in a device.
Figure 3: Mini PIMs on the SSG 20
„ Two to three status LEDs—Indicates port status. Table 4 describes the meaning
of the LED states.
ISDN BRI
T1
V.92
E1
ADSL2/2+ Annex A
ADSL2/2+ Annex B
ADSL 2 /2 +
TX/RX
SYNC
ADSL 2 /2 +
TX/RX
SYNC
V .9 2
CD
TX/RX
T1
CD
LOOP BACK
ALARM
E1
CD
LOOP BACK
ALARM
ISDN (BRI )
Channel B2
Channel B1