Juniper SRX550, Hardware Manual

Page: 81 / 220

6. Verify the parts received against the lists in “Verifying Parts Received with the SRX550 Services
Gateway” on page 65 .
7. Store the brackets and bolts inside the accessory box.
8. Save the shipping carton and packing materials in case you need to move or ship the services gateway
at a later time.
RELATED DOCUMENTATION
Preparing the SRX550 Services Gateway for Rack-Mount Installation | 67
Installation Overview for the SRX550 Services Gateway | 60
Verifying Parts Received with the SRX550 Services Gateway
The SRX550 Services Gateway shipment package contains a packing list. Check the parts in the shipment
against the items on the packing list. The packing list specifies the part numbers and carries a brief
description of each part in your order.
If any part on the packing list is missing, contact your customer service representative or contact Juniper
customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or
direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html .
A fully configured services gateway contains the chassis with installed components, listed in
Table 22 on page 65 , and an accessory box, which contains the parts listed in Table 23 on page 66 .
NOTE: The parts shipped with your services gateway can vary depending on the configuration
you ordered.
Table 22: Parts List for a Fully Configured SRX550 Services Gateway
Quantity Component
1 2U SRX550 Services Gateway chassis with 6 GPIM slots, 2 Mini-PIM slots, 1 ACE slot, 2 power
supply slots, 6 10/100/1000 base-T ports, and 4 Gigabit Ethernet SFP ports. Includes blank covers
for GPIM slots (6 covers for GPIM slots), Mini-PIM slots, ACE slot, and power supply slots.
NOTE: The ACE slot is not used.
65