Juniper SRX220 Hardware Manual Download

Page: 136 / 182

Return Procedure for the SRX220 Services Gateway

Follow the tasks list provided in

Table 42 on page 118

to return an SRX220 Services

Gateway or component to Juniper Networks for repair or replacement:

Table 42: Return Procedure for SRX220 Services Gateway

For more information, see

Task

Step

“Locating the SRX220 Services
Gateway Serial Number and Agency
Labels” on page 118

Determine the part number and serial
number of the device or component.

“Contacting Customer Support” on
page 117

Obtain a Return Materials Authorization
(RMA) number from JTAC.

“Packing the SRX220 Services
Gateway and Components for
Shipment” on page 121

Pack the SRX220 Services Gateway or
component for shipping.

NOTE:

Do not return the device or any component to Juniper Networks unless

you have first obtained an RMA number. Juniper Networks reserves the right
to refuse shipments that do not have an RMA. Refused shipments are returned
to the customer via collect freight.

For more information about return and repair policies, see the customer support Web
page at

http://www.juniper.net/support/guidelines.html

For product problems or technical support issues, open a support case using the Case
Manager link at

http://www.juniper.net/support/

or call 1-888-314-JTAC (within the United

States) or 1-408-745-9500 (outside the United States).

Documentation

Locating the SRX220 Services Gateway Serial Number and Agency Labels on page 118

•

Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 120

•

Packing the SRX220 Services Gateway and Components for Shipment on page 121

•

Contacting Customer Support on page 117

Locating the SRX220 Services Gateway Serial Number and Agency Labels

This topic includes the following sections:

•

Listing the SRX220 Services Gateway and Component Details with the CLI on page 119

•

SRX220 Services Gateway Chassis Serial Number and Agency Labels on page 119

•

SRX220 Services Gateway Mini-Physical Interface Module Serial Number
Label on page 120

118

SRX220 Services Gateway Hardware Guide for H Model Numbers

Summary of Contents for SRX220

























































































































































Search results

Summary of Contents for SRX220

Reviews:

Related manuals for SRX220

Brands by name

Popular brands

Juniper SRX220, Hardware Manual

Search results

Summary of Contents for SRX220

Reviews:

Related manuals for SRX220

Brands by name

Popular brands