Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1, Installation Manual

Page: 25 / 30

STRM Installation Guide
Changing the Network Settings of a Non-Console in a Multi-System Deployment 21
Changing the
Network Settings of
a Non-Console in a
Multi-System
Deployment
To change the network settings of a non-Console in a multi-system deployment,
you must remove all non-Console managed host from the deployment, change the
network settings, re-add the managed host, and then re-assign the component(s).
You must perform this procedure in the following order:
•
Removing the Non-Console Managed Host
• Changing the Network Settings
•
Re-Adding the Managed Host and Re-Assigning the Components
Note: This procedure requires you to use the Deployment Editor. For more
information on using the Deployment Editor, see the STRM-LM Administration
Guide.
Removing the
Non-Console
Managed Host
To remove non-Console managed host from your deployment, you must:
Step 1
Log in to STRM-LM:
https://<
IP Address
>
Where <
IP Address
> is the IP address of the STRM-LM system.
Username: admin
Password: <root password>
Where <root password> is the password assigned to STRM-LM during the
installation process.
Step 2
In the main STRM-LM Interface, click Config .
Step 3
In the main STRM-LM Interface, click Config .
Step 4
Click the deployment editor icon.
Step 5
Click the System View tab.
Step 6
Select the managed host you wish to delete.
Step 7
Use the right mouse button (right-click) to access the menu, select Remove host .
Step 8
From the Administrative Console menu, select Configurations > Deploy
Configuration Changes .
Step 9
Exit from the Administration Console.
Note: If the Administration Console is still active on your system tray, use the
right-mouse button (right-click) to access the menu and select Exit .
Changes are deployed.