Chapter 3 Configuring the Device
14
User’s Guide
3.
Enter netscreen in both the Admin Name and Password fields, and then
click Login. (Use lowercase letters only. The Admin Name and Password fields
are both case sensitive.)
The Juniper Networks NetScreen WebUI application window appears.
U
SING
THE
W
EB
UI W
IZARDS
TO
C
ONFIGURE
THE
D
EVICE
The WebUI contains wizards you can run to configure the NetScreen-5XT:
•
The Initial Configuration wizard allows you to set the operational mode, and
depending upon which mode you select, configure basic configuration and
management options. When you use the WebUI to access the device for the first
time, the Initial Configuration wizard appears.
•
The Outgoing Policy wizard allows you to configure rules that tell your
NetScreen-5XT what kind of services users on your network (the Trust zone)
are allowed to access on outside computers (the Untrust zone).
•
The Incoming Policy wizard allows you to configure rules that tell your
NetScreen-5XT the services and computers that users on outside computers (the
Untrust zone) are allowed to access on your network (the Trust zone).
•
The VPN wizard allows you to create and configure a Virtual Private Network.
In the WebUI, select the appropriate option under Wizards.
A
SSET
R
ECOVERY
If you lose the admin password, you can use one of the following procedures to reset the
NetScreen-5XT to its default settings.
Note:
NetScreen-Security Manager 2004 (NSM) and NetScreen Rapid Deployment (RD): If
you are using NSM, you can optionally configure NetScreen appliances with RD. Refer to
the Rapid Deployment Getting Started Guide for more information.
Note:
After you successfully reset and reconfigure the NetScreen-5XT, you should back up
the new configuration setting. As a precaution against lost passwords, you should back up
a new configuration that contains the Juniper Networks NetScreen default password. This
backup will ensure a quick recovery of a lost configuration. You should change the
password on the system as soon as possible.
