Juniper NetScreen 5GT Wireless, User Manual

Page: 29 / 40

Optional Configuration
NetScreen-5GT Wireless 27
To change the NetScreen device to the Home-Work port mode:
WebUI
Configuration > Port Mode: Select Home-Work from the drop-down list, and
then click Apply.
At the following prompt, click OK:
Operational mode change will erase current configuration and reset the device,
continue?
CLI
exec port-mode home-work
At the following prompt, enter y (for yes):
Change port mode from <trust-untrust> to <home-work> will
erase system configuration and reboot box
Are you sure y/[n]?
y
Modem serial Null
c
serial Null
c
ADSL
d
adsl1 Untrust or
V1-Untrust adsl1 Untrust
wireless1 Wzone1 wireless1 Wzone1
wireless2 Trust or
V1-Trust wireless2 Work
wireless3 Home
a. As labeled on the NetScreen appliance chassis.
b. Only available on the Wireless only device.
c. Only available on the Wireless only device.
d. Only available on the Wireless ADSL Annex A and B devices.
Port Name
a
Dual Untrust
b
Port Mode Combined
c
Port Mode
Interface Zone Interface Zone