Juniper JUNOSE 11.0.X IP SERVICES, Configuration Manual

Page: 225 / 366

Accessing L2C Neighbor Configuration Mode for ANCP
Use the neighbor command to create an ANCP neighbor and access the L2C Neighbor
Configuration (config-l2c-neighbor) mode.
neighbor
■
Use to create an ANCP neighbor and access the L2C Neighbor Configuration
(config-l2c-neighbor) mode.
■
Example
host1(config-l2c)# neighbor ACCESS-NODE-1
host1(config-l2c-neighbor)#
■
Use the no version to remove a specific ANCP neighbor configuration or, by
omitting the neighbor name, all ANCP neighbor configurations.
■
See neighbor.
Defining an ANCP Neighbor
The L2C Neighbor Configuration mode enables you to define an ANCP neighbor by
specifying a neighbor ID and the maximum number of branches that the neighbor
can have.
id
■
Use to specify the ANCP neighbor ID in the L2C Neighbor Configuration
(config-l2c-neighbor) mode.
■
Example
host1(config-l2c)# neighbor
host1(config-l2c-neighbor)# id 1234.5678.9123
■
Use the no version to remove the neighbor ID.
■
See id.
max-branches
■
Use to specify the maximum number of branches the ANCP neighbor can have.
■
Example
host1(config-l2c-neighbor)# max-branches 50
■
Use the no version to return the maximum number of branches to its default
value, unlimited branches.
■
See max-branches.
Configuring ANCP Neighbors
■ 199
Chapter 7: Configuring ANCP