Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual Download Page 208

Page: 208 / 366

host1(config-ipsec-tunnel-profile)#

■

Use the

version to delete the tunnel profile.

■

See ipsec tunnel profile.

Configuring IPSec Tunnel Profiles

This sections explains how to configure the parameters that exist in the IPSec tunnel
profile configuration mode.

Limiting Interface Instantiations on Each Profile

To define the maximum number of interfaces that the IPSec tunnel profile can
instantiate, use the

max-interfaces

command. Once the profile reaches the maximum

number of interfaces, the profile rejects any new interface instantiations and generates
a warning-level log. The default value (using the

version of the command) specifies

unlimited interface instantiation on a given profile.

max-interfaces

■

Use to define the maximum number of interfaces that the IPSec tunnel profile
can instantiate.

■

Example

host1(config-ipsec-tunnel-profile)#

max-interfaces 500

■

Use the

version to return the maximum value to unlimited, indicating no limit

to the number of interfaces that can be instantiated on this profile.

■

See max-interfaces.

Specifying IKE Settings

This section describes how to define the IKE local identity and IKE peer identity
values.

Setting the IKE Local Identity

To set the IKE local identity (phase 1 identity) used for IKE security association
negotiations, use the

ike local-identity

command.

NOTE:

The authentication algorithm for an IKE SA is associated with its identity. You

must ensure that the client and server are set accordingly to successfully establish
IKE security associations.

ike local-identity

182

■

Configuring IPSec Tunnel Profiles

JUNOSe 11.0.x IP Services Configuration Guide

Summary of Contents for JUNOSE 11.0.X IP SERVICES















































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.0.X IP SERVICES

Reviews:

Related manuals for JUNOSE 11.0.X IP SERVICES

Brands by name

Popular brands

Juniper JUNOSE 11.0.X IP SERVICES, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.0.X IP SERVICES

Reviews:

Related manuals for JUNOSE 11.0.X IP SERVICES

Brands by name

Popular brands