Juniper JUNOSE 11.0.X IP SERVICES, Configuration Manual

Page: 148 / 366

■
Address—IP address of the remote interface with which the session is
established. In unnumbered cases, the remote interface provides its reference
IP address.
■
State—State of the BFD session, Up, Down, or AdminDown
■
Interface—Interface on which the BFD session has been established
■
Detect/Detection Time—Time (in seconds) taken to declare the remote
interface down when no packets are received from that interface
■
Local discriminator—Value used to identify the session at the local end
■
Remote discriminator—Value used to identify the session at the remote end
■
Session up time—Amount of time the session has been operational since
the last session down event in
days:hours:minutes:seconds format.
■
Up/Down count—Number of times up/down transitions have occurred on
the session
■
Adaptivity—Number of times this session has adapted its intervals, or that
additional adaptivity is disabled for this BFD session on the router
■
Local
■
min tx interval—Minimum transmit interval (in seconds) configured on
the session at the local end
■
min rx interval—Minimum receive interval (in seconds) configured on
the session at the local end
■
multiplier—Multiplier configured on the session at the local end
■
(Adapted)
■
min tx interval—Minimum transmit interval (in seconds) to which the
session is adapted at the local end
■
min rx interval—Minimum receive interval (in seconds) to which the
session is adapted at the local end
■
multiplier—Multiplier to which the session is adapted at the local end
■
Remote
■
min tx interval—Minimum transmit interval (in seconds) configured on
the session at the remote end
■
min rx interval—Minimum receive interval (in seconds) configured on
the session at the remote end
■
multiplier—Multiplier configured on the session at the remote end
■
Up/Down count—Number of up/down transitions that have occurred on the
session
■
Local diagnostic—Reason at the local end for the last session down event
122 ■
Monitoring BFD
JUNOSe 11.0.x IP Services Configuration Guide