12.
Select one of the following Internet protocol:
•
IPv6—Internet Protocol version 6.
•
IPv4—Internet Protocol version 4.
13.
Select
Next
. The Management Interface window appears.
14.
Select port 0 to specify as the management interface and then select
Next
.
15.
Enter the values for the following parameters to configure the JSA Settings:
•
Hostname - Type a fully qualified domain name as the system hostname.
•
IP Address - IP address of the system.
•
Network Mask - Network mask for the system.
•
Gateway - Default gateway address.
•
Primary DNS - Primary DNS server address.
•
Secondary DNS—Optional. Secondary DNS server address.
•
Public IP—Optional. Public IP address of the server.
•
Email server— E-mail server name. If you do not have an e-mail server, specify the local host in this field.
16.
Select
Next
. The New Root Password window appears.
17.
Enter your new password, and select
Next
. The Confirm New Root Password window appears.
18.
Re-enter your new password to confirm, and select
Finish
. A series of messages appears as JSA continues with the installation;
this process takes from three-to-five minutes. When the JSA installation process is complete, the message window appears.
Step 7: Finish Installation
1.
Select
OK
to complete the installation.
2.
Type exit and press
Enter
.
Step 8: Verifying the Settings
Verify the appliance configuration settings:
1.
Open your Web browser.
2.
Log in to JSA with the username admin and the password
<root password>
.
<root password> is the new root password that you set during the configuration process.
Copyright © 2018, Juniper Networks, Inc.
6
How to Set Up Your JSA7500 Appliance
