1.
Using a serial connection, log in as root (default username) and the password is not required:
Username:
root
NOTE:
The username is case sensitive.
2.
Press
Enter
. The End User License Agreement (EULA) appears.
3.
Read the information in the window. Press the Spacebar to advance each window until you have reached the end of the
agreement. Type
YES
to accept the agreement, then press
Enter
. The Appliance ID selection window appears as shown in
.
Figure 1: JSA7500 Appliance ID Selection
4.
Select the appliance ID and then press
Enter
to select
Next
.
For more information on the appliance ID, see the KB article KB14832 at
https://kb.juniper.net/KB14832
5.
Select
normal
from the following types of setup:
•
normal—Default setup.
•
recovery—HA recovery setup.
6.
Select
Next
. The Tuning Template window appears.
7.
Select
Enterprise
to use to tune your appliance.
8.
Select
Next
. The Date and Time window appears.
9.
Select the method you want to use to set the date and time.
•
Manual— Allows you to manually input the date and time. Select
Next
.
•
Server— Allows you to specify your time server. Select
Next
.
10.
Select your time zone continent or area, and then select
Next
.
11.
Select your time zone region, and then select
Next
.
5
Copyright © 2018, Juniper Networks, Inc.
How to Set Up Your JSA7500 Appliance
