Juniper Archer 3, Owner'S Manual

Page: 16 / 52

12
Archer 3 Rugged Handheld Owner’s Manual
LED Activity Indicators
LED activity indicators are located on the keypad
underneath the power button.
Red LED on the right (associated with power adapter):
„
Blinking: AC adapter is plugged in, and the battery is
charging
„
Solid: AC adapter is plugged in, and the battery is full (not
charging)
Green LED on the left (associated with notifications):
„
When the operating system has something to notify you
of, this LED behaves accordingly. For example, if you turn
on GPS/GNSS the green LED blinks periodically.
Blue LED on the left (associated with shift functions):
„
Solid: When you press the shift key, the blue LED lights
up and stays on until another key is pressed. If the shift
function is locked, the blue LED stays on.
SD Cards
The Archer 3 has a slot for a micro SD/SDXC card located in
the battery compartment. To insert or remove a card follow
these steps:
1. Power off the handheld by holding the power button until
the Power Button menu appears and selecting Power Off .
CAUTION: Power-off the Archer 3 before removing the
battery. If you remove the battery without powering-off
the handheld, you may damage the handheld and/or
lose data.
2. Loosen the screws to the battery compartment, and
remove the door. The hand strap remains attached.
CAUTION: The Archer 3 is not sealed against water and
dust when the battery door is not installed properly.
3. Remove the battery pack.
!
!