J-SPIRIT Instruction Manual
J-SPIRIT Instruction Manual
24
25
16. Using the J-SPIRIT with the Carrycot
To assemble the carrycot, remove the apron and mattress to gain
access to the stay bars in the bottom of the carrycot.
Using the tabs, pull the stay bars into the clips on the baseboard until
you hear them click into place
(fig. 38)
.
Replace the mattress and reattach the apron.
IMPORTANT: ensure that the stay bars are fully engaged before using
the carrycot.
Your J-SPIRIT carrycot comes with adaptors that are also compatible
with Group 0 Car Seats.
Slide the car seat adaptors into the housings on the chassis
(fig. 39)
.
The car seat adaptors are labelled ‘L’ and ‘R’. This is from the
perspective of you standing behind the chassis.
The adaptors will lock into place with a click.
WARNING
:
ensure the car seat adaptors are locked in place
before use.
Attach your carrycot by lowering it on to the adaptors
(fig. 40)
.
To adjust the carrycot hood, depress the buttons on the side of the
13. Operating the hood
Pull the hood forwards to open and back to close
(fig. 28, 29 & 30).
Using the hood ventilation panel.
There is a ventilated panel within the hood for adding air circulation on
warmer days. Unzip the zippers on the rear of the hood fully to reveal
the mesh panel
(fig. 31).
Fold back the hood fabric to open the
ventilation panel fully
(fig. 32).
To close, fold the fabric back and zip up.
14. Removing the seat unit
Lift the seat part of the seat unit upwards to meet the back rest
(fig. 33).
Drop the seat unit forwards into a horizontal position and lift off the
chassis
(fig. 34 & 35).
15. Attaching the seat unit in parent-facing mode
Slide the seat unit into the chassis housings with the seat facing the
rear of the stroller
(fig. 36).
Lift the back rest into a seated position
(fig. 37).
WARNING
: ensure the seat unit is locked in place on the
chassis before use.
