J-SPIRIT Instruction Manual
J-SPIRIT Instruction Manual
26
27
hood
(fig. 41)
and pull up until you hear it click into place.
Depress the buttons again to put the hood down.
To remove the carrycot, depress the release buttons on the side of the
carrycot
(fig. 42)
and lift upwards from the chassis and the adaptors.
To release the car seat adaptors twist the locking device round and lift off
(fig. 43)
.
CAUTION: always remove the car seat adaptors before folding the chassis.
WARNING
:
the J-SPIRIT carrycot is suitable for a child who cannot
sit unaided, roll over or push itself up on its hands and knees. Maximum
weight of the child: 9kg.
WARNING
:
do not let other children play unattended near the carrycot.
WARNING
:
do not use if any part is broken, torn or missing.
WARNING
:
no additional mattress should be added unless
recommended by the manufacturer.
Never use the carrycot on a stand.
Do not leave your child unattended.
WARNING
:
before carrying or lifting, make sure that the handle is in
the correct position of use.
WARNING
:
the head of the child in the carrycot should never be
lower than the body of the child.
IMPORTANT:
• Ensure that you only use the carrycot on a horizontal, firm, level and
dry surface.
• Regularly inspect the handle and base of the carrycot.
• Never use/leave your carrycot near open fire and other strong heat
sources such as electric fires, gas fires etc.
• This carrycot is not a safe means of transport by car and should
NEVER be used as such.
17. Using the J-SPIRIT with a Group 0 Car Seat
Slide the car seat adaptors into the housings on the chassis
(fig. 44)
.
The car seat adaptors are labelled ‘L’ and ‘R’. This is from the
perspective of you standing behind the chassis.
The adaptors will lock into place with a click.
WARNING
:
ensure the car seat adaptors are locked in place
before use.
Attach your car seat by lowering it on to the adaptors
(fig. 45)
.
To release the car seat adaptors twist the locking device round and lift
off
(fig. 46)
.
