Jungheinrich EJE KmS 16, Operating Instructions Manual

Page: 25 / 45

020
1.G
B
E 4
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the lifting device) for vis-
ible damage.
Switching on the truck
– Step onto the standing platform.
– Push down the control shaft adjusting lever (10) (
o
), swivel the control shaft to the
desired position and release the control shaft adjusting lever again.
– Pull out the master switch (9).
– Insert the key in the key switch (3) and turn the key clockwise towards the “I” posi-
tion until reaching the stop.
– Check the warning signal (horn) (6) for correct functioning.
– Check the controller (8) for correct functioning (refer to section 4.2).
The truck is now ready for operation.
The combination instrument (1) (
o
) shows the available battery capacity.
– Check the service and counter-current brake for correct function (refer to section
4.2).
A
Operating key (7) without function.
020
1.G
B
E 4
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the lifting device) for vis-
ible damage.
Switching on the truck
– Step onto the standing platform.
– Push down the control shaft adjusting lever (10) (
o
), swivel the control shaft to the
desired position and release the control shaft adjusting lever again.
– Pull out the master switch (9).
– Insert the key in the key switch (3) and turn the key clockwise towards the “I” posi-
tion until reaching the stop.
– Check the warning signal (horn) (6) for correct functioning.
– Check the controller (8) for correct functioning (refer to section 4.2).
The truck is now ready for operation.
The combination instrument (1) (
o
) shows the available battery capacity.
– Check the service and counter-current brake for correct function (refer to section
4.2).
A
Operating key (7) without function.