Release the brake
Tools and Material Required
– Two M5x45 screws
– Spanner
Procedure
• Switch off the truck, to do this:
• Turn the key in the key switch (14) anti-clockwise as far as it will go. Remove
the key from the key switch (14).
• Press button O on CanCode (56).
• Press the red button on the ISM access module(
o
).
• Press the emergency disconnect switch (10).
• Remove the front panel (15), see page 159.
• Remove the right-hand drive panel (63), see page 160.
• Use wedges to prevent the truck from moving.
• Insert two M5x45 screws (61) as far as they will go in the brake (62) and lift up the
anchor plate.
Z
The two M5x45 screws (61) are used to tension (unlock) the compression springs
which activate the parking brake, so that the truck does not brake when de-
energised.
• Remove the wedges.
The brake is now released. The truck can be moved.
61
15
63
10
62
14,56
Activating the brake
Procedure
• Use wedges to prevent the truck from moving.
• Remove the two M5x45 screws (61) from the brake (62).
101
04.19 en-GB
Summary of Contents for EJE 220
