Jungheinrich EFG 213, Operating Instructions Manual

Page: 97 / 243

03.13 EN
96
Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause
injury
An unsecured driver's seat can slide out of
its guide during travel, resulting in
accidents.
X
The driver's seat must be locked in
position.
X Do not adjust the driver’s seat while
travelling.
Procedure
• Sit on the driver’s seat.
• Pull up the driver’s seat locking lever123 in the direction of the arrow.
• Push the driver’s seat forwards or backwards to the desired position
• Engage the driver’s seat locking lever (123) in position.
The seat position is now correctly set.
Switching the seat heating on and off
Procedure
• Press the seat heating switch (125).
Switch setting 1 = Seat heating on.
Switch setting 0 = Seat heating off.
Adjusting the lumbar vertebrae support (
o
)
Procedure
• Turn the hand wheel (126) to the required position.
Position 0 = no warping in lumbar vertebrae area.
Position 1 = increasing warping in upper lumbar vertebrae area.
Position 2 = increasing warping in lower lumbar vertebrae area.
The lumbar vertebrae support is now set.
121
124 123
122
125 126