175
03.13 EN
4.5
Replacing wheels
WARNING!
A truck tipover can cause accidents
In order to raise the truck, use only suitable lifting gear at the points specially provided
for this purpose.
X
Note the weight of the truck on the data plate.
X
Always use a jack with a minimum capacity of 2500 kg kg.
X
Raise the unladen truck on a level surface.
X
When raising the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
WARNING!
Falling wheels can cause injury
X
The wheels of the truck are very heavy. A single wheel can weigh up to 150 kg.
X
Always replace wheels with a suitable tool and protective equipment.
Dismantle the wheels
Requirements
– Prepare the truck for maintenance and repairs
(see "Preparing the truck for maintenance and
repairs" on page 171).
Tools and Material Required
– Jack
– Hard wooden blocks
– Mounting lever
– Torque wrench
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see "Identification points and data plates" on page 34.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Undo the wheel attachment (177).
• Disassemble the wheel, using a suitable mounting lever if necessary.
The wheel is now disassembled.
177
Summary of Contents for EFG 213
