Room controller display compact module
Figure 4: Activating programming mode
￭
Activate programming mode: Press and hold push-button (17). Then press push-button
(18).
The operation LED (19) flashes quickly.
￭
Load the physical address into the device.
The operation LED (19) returns to its previous state – off, on, or flashing slowly.
￭
Write the physical address on the device label.
￭
Load application software into the device.
Fitting the control surfaces
The buttons (10) are available as a complete set of buttons. Individual buttons can be replaced
using buttons with icons.
The mounting spider is not required to mount the buttons.
The physical address is loaded into the device.
￭
Place the buttons (10) on the device in the correct orientation and snap in with a short
push.
Note the TOP = marking.
6
Appendix
6.1 Technical data
KNX medium
TP 1
Commissioning mode
S-mode
Rated voltage KNX
DC 21 ... 32 V SELV
Current consumption KNX
max. 25 mA
Connection mode KNX
device connection terminal
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Protection class
III
6.2 Accessories
Cover kit for Room controller module
Art.-no.: ..4093 TSA..
Push-button extension module, 1-gang
Art.-no.: 4091 TSEM
Push-button extension module, 2-gang
Art.-no.: 4092 TSEM
Push-button extension module, 3-gang
Art.-no.: 4093 TSEM
6 / 7
32573243
16.04.2020
J:0082573243
