Figure 4: Installation in appliance box
(4) Appliance box
(5) Partition
(6) Potential-free contacts, e.g. for window contact or installation pushbuttons
Figure 5: Spacing between mains cable and control cable
Minimum spacing between the mains voltage and bus/extension wires: 4 mm (figure 5).
Do not exceed permissible total load including transformer power dissipation.
o
Connect the load. Use the supplied sprung screwless terminals. Flexible cable ends must
be tin-plated.
o
Connect the device to KNX.
o
If necessary, connect potential-free contacts to the inputs (figure 3).
o
Install the device in the appliance box.
Function of Inputs 1 and 2 in the as-delivered state
Input contact
Switch actuator 1gang
Switch actuator 2gang
1 close
Toggle
Switch-over output 1
1 open
–
–
2 close
Toggle
Switch-over output 2
2 open
–
–
4/6
82553923
J:0082553923
18.09.2012
Switch actuators flush mounted – 1gang 16A, 2gang 6A
