Removing the cover
Figure 7: Removing the cover
o
Press the cover to the side and pull it off (figure 7).
4.2 Commissioning
Load the address and the application software
o
Switch on the bus voltage
o
Assign physical address.
o
Load the application software into the device.
o
Note the physical address on the device label.
5 Appendix
5.1 Technical data
KNX
KNX medium
TP 1
Commissioning mode
S-mode
Rated voltage KNX
DC 21 ... 32 V SELV
Power consumption KNX
max. 350 mW
Standby
max. 200 mW
Connection type for bus
Connection terminal
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Inputs
Rated voltage
AC/DC 12 ... 48 V
Signal level "0" signal
AC/DC -48...+2 V
Signal level "1" signal
AC/DC 8...48 V
Input voltage at nominal voltage
2 mA
Signal duration
min. 30 ms
Rated frequency AC signal
30 ... 60 Hz
Number of contacts per input
NO contacts
unlimited
NC contacts
max. 20
Output
DC 24 V
Output voltage
DC 24 V SELV
Housing
Fitting width
72 mm / 4 modules
Power consumption
5/6
82578403
J:0082578403
23.03.2012
Binary input 8-gang, 24 V
