o
Route antenna out of the distributor providing reliable isolation.
To route the cable for the external antenna in the distributor, proceed as follows:
o
Unlock the black slide (4) by pulling up on the end of the bow and pull out slide (figure 4).
o
Insert the antenna connector (7) into the SMB socket (2).
o
Route antenna out of the distributor providing reliable isolation.
o
Re-insert black slide until it engages noticeably.
i
The slide fixes the cable in place and ensures that the maximum installation height in the
distributor is maintained.
5 Appendix
5.1 Technical data
Rated voltage
AC 230 V ~
Mains frequency
50 / 60 Hz
Ambient temperature
0 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Connection
single stranded
1.5 ... 4 mm²
Finely stranded without conductor sleeve
0.75 ... 4 mm²
Finely stranded with conductor sleeve
0.5 ... 2.5 mm²
Fitting width
36 mm / 2 modules
Radio frequency
433.05 MHz ... 434.79 MHz
Receiver category
2
5.2 Conformity
Albrecht Jung GmbH & Co. KG hereby declares that the radio system type
Art. No. FK100REG
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
5.3 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de
4/4
32549823
J0032549823
24.10.2016
Radio Management
Master receiver for rail mounting
