i
The programming mode is exited automatically after about 1 minute.
i
Teach light scene buttons separately.
i
When a radio transmitter is taught, All On and All Off buttons that are present are
automatically also taught.
Deleting radio transmitters individually
o
Teach the radio transmitter to be deleted again (see Teaching a radio transmitter).
LED blinks quickly. The radio transmitter has been deleted.
i
If several channels or light scenes of a radio transmitter have been taught, they all must be
deleted individually.
6 Appendix
6.1 Technical data
Rated voltage
AC 230 V ~
Mains frequency
50 / 60 Hz
Ambient temperature
-20 ... +55 °C
Circuit breaker
max. 10 A
Connected load
Incandescent lamps
2300 W
HV halogen lamps
2300 W
Inductive transformers
1000 VA
Electronic transformers
1500 W
Fluorescent lamps, uncompensated
1200 VA
Fluorescent lamps, parallel compensated
920 VA
Switching current
10 A
Contact type
µ contact
Dimensions L×W×H
175×42×18 mm
Radio frequency
433.05 MHz ... 434.79 MHz
Receiver category
2
Teachable radio transmitter
max. 30
6.2 Troubleshooting
Device does not respond, or only sometimes.
Cause 1: battery in the radio transmitter is empty.
Change the battery in the radio transmitter.
Cause 2: Radio range exceeded. Structural obstacles reduce the range.
Check the installation situation.
Check routing of antenna. Laying the antenna stretched out increases the range.
Using a radio repeater.
6.3 Conformity
Albrecht Jung GmbH & Co. KG hereby declares that the radio system type
Art. No. FA10EB
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
6.4 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
4/5
82526923
J0082526923
09.09.2016
Radio Management
Radio switch actuator, built-in
