Jung 5071 RF TSM, Manual

Page: 6 / 6

KNX RF radio transmitter module
9 Troubleshooting
After a button-press, the actuation/transmission LED (10) flashes slowly for 3 seconds.
Cause: battery in the wall transmitter is almost empty.
Changing the battery (see chapter Commissioning – Inserting the battery).
Receiver does not respond, actuation/transmission LED (10) flashes slowly for 3 seconds.
Cause: The wall transmitter cannot transmit the telegram, e.g. due to a missing group address.
Correct the programming.
Receiver does not react, actuator feedback is not displayed.
Cause 1: Radio range exceeded. Structural obstacles reduce the range.
Use of the media coupler as a radio repeater.
Cause 2: Receiver or media coupler is not ready for operation.
Check the receiver, mains voltage or media coupler.
Cause 3: There are radio faults, e.g. through outside radio.
Eliminate radio interference.
10 Accessories
Cover kit 1-gang Art. no. ..501 TSA..
Cover kit 2-gang Art. no. ..502 TSA..
Cover kit 3-gang Art. no. ..503 TSA..
Cover kit 4-gang Art. no. ..504 TSA..
KNX RF radio converter Art. no. MK100RF
11 Conformity
Hereby Albrecht Jung GmbH & Co. KG declares that the radio system type
Art. no. ..5071 RF TSM/..5072 RF TSM/..5073 RF TSM/..5074 RF TSM
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
12 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
kundencenter@jung.de
www.jung.de
6 / 6
32595413 29.07.2019
j0082595413