The operation LED (13) returns to its previous state – off, on, or flashing slowly.
o
Write the physical address on the device label.
o
Load the application software into the device.
Installing the buttons
The buttons are available as a complete set of buttons. Individual buttons or the complete set of
buttons can be replaced using buttons with symbols.
i
The mounting spider is not required to mount the buttons.
The physical address is loaded into the device.
o
Place the buttons on the device in the correct orientation and snap in with a short push.
Note marking
TOP
.
picture 3: Button assignment
5 Appendix
5.1 Technical data
KNX medium
TP 1
Commissioning mode
S mode
Rated voltage KNX
DC 21 V ... 32 V SELV
KNX power consumption
typical 150 mW
Connection mode KNX
Connection terminal
Safety class
III
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
5.2 Accessories
Cover kit 1-gang, complete
Art.-No.: ..401 TSA..
Cover kit 2-gang, complete
Art.-No.: ..402 TSA..
Cover kit 3-gang, complete
Art.-No.: ..403 TSA..
Cover kit 4-gang, complete
Art.-No.: ..404 TSA..
Cover 1-gang with symbols
Art.-No.: ..401 TSAP..
Cover 2-gang with symbols
Art.-No.: ..402 TSAP..
Cover 4-gang with symbols, for button 1 or 4
Art.-No.: ..404 TSAP..14
Cover 4-gang with symbols, for button 2 or 3
Art.-No.: ..404 TSAP..23
Adapter frame for CD 500
Art.-No.: CD 4 AR
4/5
32566613
J:0082566613
24.11.2009
Standard push-button module with integrated BCU
