background image

Page 8

0024015020 12.10.2012

All of the red LEDs on both push-button sensor modules flash rapidly. 

The button assignment has been applied to the push-button sensor module, and cloning mode is terminated.

•  For further push-button sensor modules, repeat the steps described above.

 

It is not possible to clone devices with different release statuses. Push-button modules register a fault by flashing quickly. 

 

Cloning mode cannot be ended manually. In order to abort an ongoing cloning mode, do not actuate any push-button sensor module for 2 

minutes.

 

If cloning mode was activated at the relay station without any push-button sensor modules being connected, cloning mode is terminated 

automatically after 2 minutes.

Appendix
Technical data

Power supply  

via universal stations 

DC 24 V SELV

Min. current TSM 

approx. 3 mA

Max. current TSM 

approx. 12 mA

Min. current TSM + TSEM 

approx. 3 mA

Max. current TSM + TSEM 

approx. 19 mA

Safety class 

III

Ambient temperature 

+5 ... +45 °C

Storage temperature 

-25 ... +70° C

Connection type 

connection terminal

Cable length 

max. 100 m

Cable type 

J-Y(St)4 2 x 2 x 0.8

Help in case of problems

Push-button sensor module does not respond

Two stations are connected in parallel

Device address of the second station was not converted. 

Change device address

Push-button sensor module does not display the switching state correctly

Switch on status feedback to the station (see relay and dimming station instructions).

Accessories

Universal relay station  

Art. No.: RS 8 REG HE

Universal dimming station Art. No.: UDS 4 REG HE

Warranty

We reserve the right to modify technical and formal characteristics of the product insofar as this supports technical progress.

Our products are under guarantee within the scope of the statutory provisions.

Please send the device, postage paid, to our central Customer Service Centre, with a description of the error.

ALBRECHT JUNG GMBH & CO. KG

Service Centre

Kupferstr. 17-19

44532 Lünen

Germany

 

The CE mark is a free trade symbol intended solely for the authorities, and does not carry any guarantee of properties.

Summary of Contents for 4008 TSM









Reviews: