Push button module
Prog. push-button
2-gang with text field, 8-gang, 4-gang, 3-gang (8) + (9)
1-gang with text field, 2-gang
(8) + (10)
1-gang
(8) + (11)
The operation LED (12) flashes quickly.
o
Load physical address into the device.
The operation LED (12) returns to its previous state – off, on, or flashing slowly.
o
Write the physical address on the device label.
o
Load application software into the device.
Fitting the control surfaces
The button sensor module covers will be necessary as control surfaces (see chapter 5.2.
Accessories).
The physical address is loaded into the device.
Observe the layout of the covers (picture 4).
o
Place control surfaces on the device in the right orientation and snap in with a short push.
Note marking on inner side
TOP
= observe top.
picture 4
5/7
32558813
J:0082558813
19.06.2009
Push-button module with integrated BCU Standard / Universal
