Jung Pumpen compli 300, Instruction Manual

Page: 2 / 6

2
You have purchased a product made by JUNG PUMPEN and
with it, therefore, also excellent quality and service. Secure this
service by carrying out the installation works in accordance
with the instructions, so that our product can perform its task
to your complete satisfaction. Please remember that damage
caused by incorrect installation or handling will adversely af -
fect the guarantee.
Therefore please adhere to the instructions in this manual!
As with all electrical devices, this product can also fail to ope -
rate due to an interruption in the electricity supply or due to
a technical defect. If this could result in damage, a mains-in -
dependent alarm system must be installed. Depending on the
application, you may also wish to install an emergency power
generator, or a second system as a back-up.
Safety instructions
This instruction manual contains essential information that
must be observed during installation, operation and servicing.
It is therefore important that the installer and the responsib -
le technician/operator read this instruction manual before the
equipment is installed and put into operation. The manual
must always be available at the location where the pump or
the plant is installed.
Failure to observe the safety instructions can lead to the loss of
all indemnity.
Labelling of instructions
In this instruction manual, safety information is distinctly la -
belled with particular symbols. Disregarding this information
can be dangerous.
General danger to people
Warning of electrical voltage
ATTENTION!
Danger to equipment and operation
Qualification and training of personnel
All personnel involved with the operation, servicing, inspection
and installation of the equipment must be suitably qualified
for this work and must have studied the instruction manual in
depth to ensure that they are sufficiently conversant with its
contents. The supervision, competence and areas of respon -
sibility of the personnel must be precisely regulated by the
operator. If the personnel do not have the necessary skills, they
must be instructed and trained accordingly.
Safety-conscious working
The safety instructions in this instruction manual, the existing
national regulations regarding accident prevention, and any
internal working, operating and safety regulations must be ad -
hered to.
Safety instructions for the operator/user
All legal regulations, local directives and safety regulations
must be adhered to.
The possibility of danger due to electrical energy must be pre -
vented.
Leakages of dangerous (e.g. explosive, toxic, hot) substances
must be discharged such that no danger to people or the envi -
ronment occurs. Legal regulations must be observed.
Safety instructions for installation, inspection and main-
tenance works
As a basic principle, works may only be carried out to the equip -
ment when it is shut down. Pumps or plant that convey harmful
substances must be decontaminated.
All safety and protection components must be re-fitted and/or
made operational immediately after the works have been com -
pleted. Their effectiveness must be checked before restarting,
taking into account the current regulations and stipulations.
Unauthorised modifications, manufacture of spare parts
The equipment may only be modified or altered in agreement
with the manufacturer. The use of original spare parts and ac -
cessories approved by the manufacturer is important for safety
reasons. The use of other parts can result in liability for conse -
quential damage being rescinded.
Unauthorised operating methods
The operational safety of the supplied equipment is only gua -
ranteed if the equipment is used for its intended purpose. The
limiting values given in the "Technical Data" section may not be
exceeded under any circumstances.
Instructions regarding accident prevention
Before commencing servicing or maintenance works, cordon
off the working area and check that the lifting gear is in perfect
condition.
Never work alone. Always wear a hard hat, safety glasses and
safety shoes and, if necessary, a suitable safety belt.
Before carrying out welding works or using electrical devices,
check to ensure there is no danger of explosion.
People working in wastewater systems must be vaccinated
against the pathogens that may be found there. For the sake of
your health, be sure to pay meticulous attention to cleanliness
wherever you are working.
Make sure that there are no toxic gases in the working area.
Observe the health and safety at work regulations and make
sure that a first-aid kit is to hand.
In some cases, the pump and the pumping medium may be hot
and could cause burns.
For installations in areas subject to explosion hazards, special
regulations apply!