JUNCTEK JDS8000 Series, User Manual, Page: 12 / 62

JUNCTEK
JDS8000 Series User’s Manual 6
Pulse number
1-1048575
External modulation input characteristics
Input signal amplitude range
0~3Vpp
Input signal frequency range 20Hz~20kHz
Sweep characteristics
Sweep channel
CH1
or
CH2
Carrier waveform Sine, square, ramp, arbitrary (except DC)
Sweep function Sweep frequency, sweep amplitude, sweep duty
Sweep mode Linear, logarithmic
Sweep direction Increment, decrement, round trip
Start/stop frequency
Consistent with the upper and lower limits of the
corresponding carrier frequency
Start/stop amplitude
Consistent with the upper and lower limits of the
corresponding carrier amplitude
Start/stop duty cycle
Consistent with the upper and lower limits of the
corresponding carrier duty cycle
Sweep time
0.01S-640S
Voltage control characteristics
Voltage control channel CH1 or CH2
Carrier wave
Sine wave, square wave, ramp wave, arbitrary wave
(except DC)
Voltage control function
Frequency control, amplitude control, and duty cycle
control
Sweep mode Linear, logarithmic
Start/stop frequency
Consistent with the upper and lower limits of the
corresponding carrier frequency
Start/stop amplitude
Consistent with the upper and lower limits of the
corresponding carrier amplitude
Start/stop duty cycle
Consistent with the upper and lower limits of the
corresponding carrier duty cycle
Voltage control voltage range 0V-5V, start point and stop point can be set arbitrarily
General parameters
Display
Screen
2.8
inch TFT color LCD screen
Store and load
Quantity 100 groups
Location
00 to 99 (The data of 00 storage location is loaded by
default)
Interface
Interface method USB to serial interface
Extension interface
Serial port with TTL level, convenient for secondary
development
Communication rate Standard
115200bps