JUNCTEK JDS8000 Series, User Manual, Page: 10 / 62

JUNCTEK
JDS8000 Series User’s Manual 4
11MHz≤
Frequency
＜
31MHz
31MHz≤
Frequency
＜
61MHz
61MHz≤
Frequency
≤80MHz
2mVpp~10Vpp
2mVpp~5Vpp
2mVpp~3.6Vpp
Amplitude range of
square/triangle waveforms
Frequency
＜
1MHz
1MHz≤ Frequency
＜
11MHz
11MHz≤
Frequency
≤15MHz
2mVpp~25Vpp
2mVpp~20Vpp
2mVpp~10Vpp
Amplitude resolution
1mVpp
Amplitude stability
± 1% ±1 mVpp (@ 1 kHz,>10 mVpp)
Amplitude flatness

±1%(0.1dB)<10MHz

±2%(0.2dB)<10MHz~50MHz

±10%(0.9dB)<50MHz~70MHz
Waveform output
Impedance 50Ω±10% (typical)
Protection
All signal outputs can be on within 60s under load
short circuit
DC Offset
Adjustment range -9.99V-12.00V
Resolution
0.01 V
Phase characteristics
Adjustment range 0~359.99°
Resolution
0.01°
Measurement and counter function
Measurement mode
Measurement function
Frequency, positive/negative pulse width, period,
duty cycle
Coupling method DC, AC
Gate time
0.001S-10.000S
Measurement mode Low frequency, high frequency
Frequency measurement range
1Hz~100MHz
Input signal amplitude range
1Vpp~20Vpp
Period measurement 10nS~4S
Pulse Width 4S
Duty cycle measurement range
0.01%~99.99%
Counter mode
Range
0-4294967295
Coupling method DC and AC
Counter method Manual
Modulation characteristics
Modulation type AM
、
FM
、
PM
、
ASK
、
FSK
、
PSK
、
PWM
、
BURST
AM
Carrier waveform Sine, square, ramp, arbitrary (except DC)
Source Internal/External
Modulation waveform Sine, square, ramp, noise, arbitrary