Jumpking JK1204C1, User Manual, Page: 20 / 24

13.Note: During steps 13 and 14, you will
“sew”the lower edge of the Netting(15)
to the V-rings on the bed using the
Cords(18).
Locate the V-ring closest to the door.
Thread one end of a Cord(18)through
the lower edge of the Netting(15)above
the V-ring and then thread the Cord
through the V-ring. Tie the Netting to
the V-ring, by making a double knot in
the Cord.
13
15
18
15
18
14
14.Thread the Cord(18) through the lower
edge of the Netting(15) halfway between
the first V-ring and the V-ring to the
left, and then thread the Cord through
the V-ring to the left. Repeat this
procedure until the entire Cord is
threaded through the Netting and the
V-rings as shown. Keep the Cord taut.
Tie the end of the Cord to the last V-
ring that it reaches.
Tie a second Cord(not shown)to the last
V-ring reached by the first Cord. Thread
the second Cord through the Netting(15)
and the V-ring as described above. Repeat
this procedure with the remaining Cords
until the last Cord reaches the first
Cord. (Note: The last Cord may overlap
the first Cord.)
Make sure that the
Netting is sewn to every V-ring on the
trampoline bed; the Netting below the
door must also be sewn to the V-rings.
15. The trampoline/enclosure is now fully
assembled. Make sure that all parts are
securely attached. Familiarize yourself
and all users of the trampoline/enclosure
with the safety precautions, use and
instructional materials, and care and
maintenance instructions in this manual
before using .
DISASSEMBLY
To disassemble the trampoline/enclosure, follow assembly steps 1 through 15 in reverse order.
Do not attempt to disassemble any trampoline frame components before the springs and the
bed have been removed. Use gloves to protect your hands from pinch points during disassembly.
15