Jumpking JK1204C1, User Manual

Page: 18 / 24

6. The trampoline is now fully assembled. Make
sure that all parts are securely attached.
Familiarize yourself and all users of the tram-
poline with the safety precautions, use and
instructional materials, and care and mainte-
nance instructions in this manual before using
the trampoline.
6
7. Lay a Straight Tube(12) and a Top Tube (13)
with Plastic Cap on the ground.
Make sure that the Straight Tube (12) is oriented
so the small holes are in the position shown.
Slide a Foam Sleeve (16) onto each of the tubes;
note that the ends of the Straight Tube (12) should
not be covered.
Insert the Straight Tube (12) into the Top tube(13).
Tighten a Self-tapping Screw (11) into the small hole
in the Tube (12,13).
Assemble the remaining Straight Tubes (12), Top
Tubes (13), and Foam Sleeves (16) in the same
way.
8
18
T-connector(4)
Straight tube (12)
8. Insert the end of Straight Pole (12,13) into the hole
of T-coWelded tube (4).
Attach the other three Straight Pole (12,13) in the
same way. See inset drawing.
7
Tighten Self-tapping Screw
Into Small Hole
Small Hole
Plastic Cap
(14)
12
13
11
12
16
16
16
16
Plastic Cap
(14)