This is the device's only charm. In addition to switching
on, it is also used for switching off and switching
individual treatment methods.
Connect to a mobile app
Turn on the electrostimulator and start jumperhealth.
Here, start the measurement using an
electrostimulator and the device will automatically
connect to your mobile phone. The link works on the
basis of Bluetooth. In the History tab, you can see the
history of treatment.
Use
Remove the foil from the electrodes and place them in
the desired place on the body. Turn on the device and
pair it with the app. Note the device works without
linking to the application, but you cannot control the
duration of treatment, which is set by default to 15
minutes.
Set the duration of treatment in the app. At the same
time, you can see what methods of treatment you have
set up (it switches with the button on the device).
The intensity of treatment is always set to the mildest
degree at the beginning. We strongly recommend
adding intensity carefully and only after making sure
that the intensity is weak that you add another degree.
