background image

                                                                                               

 

 

Upward 

 

Non-hook 

 

Specifies serial number of the Product 

 

Batch code 

 

It indicates that the equipment should be sent to the 
special  agencies  according  to  local  regulation  for 
separate collection after its useful life. 

SECTION 3: USING THE PRODUCT 

This section provides the description for operation.         
 

3.1 UNPACKING AND INSPECTING 

Every  attempt  is  made  to  ensure  your  accurate  and  complete  order. 
However, to be sure that your correct order, verifying the contents of the 
box against your packing slip. 
 

The  product  is  designed  for  simplicity  of  operation  and  set-up  and 
requires  minimal  assembly.  The  following  items  are  included  in  your 
box:     

1 (one) Product 

1 (one) Headset 

1 (one) Recording Cable 

1 (one) Operator

s manual 

 

                                                                                               

 

15

 

* Don

t use strong solvent, for example, Acetone. 

* Never use an abrasive such as steel wool or metal polish. 
* Do not allow any liquid to enter the product, and do not immerse any 
parts of the device into and liquids. 
* Avoid pouring liquids on the device while cleaning. 
* Don

t remain any cleaning solution on the surface of the device. 

Wipe  the  surface  of  sensor  of  transducer  with  70%  ethanol  or  alcohol, 
self-air dry or clean with a clean, dry cloth. 

 

4.6 DISINFECTIONS 

Cleaning  the  unit  surface  and  the  transducer  as  the  above  mentioned, 
then  wipe  the  surface  of  transducer  with  70%  ethanol  or  alcohol,  clean 
the transducer surface with a dry, soft cloth. 
* Don

t use low temperature steam sterilization or other way to sterilize. 

* Don

t use high temperature sterilizing process.   

 

4.7 RECYCLING THE BATTERIES 

The batteries are recyclable.    Remove the old battery from the Product 
and follow your local recycling guidelines or Refer to local regulations. 

 

WARNING:

 Irregular treatment of batteries may be result in 

hazards to health and environment. 

 

4.8 AUTHORIZED REPAIR SERVICE 

The Product has no user-serviceable internal components. Try to resolve 
any maintenance issues with the Product by using the Troubleshooting 
Table presented in this chapter. If you are unable to resolve the problem, 
contact Jumper Medical Equipment Co., Limited Service department. 

 

NOTE:

 The warranty will be void upon unauthorized disassembly 

or service of the product. 

 

4.9 CONTACT INFORMATION 

 

Product is manufactured by: 

Summary of Contents for AngelSounds JPD-100S















Reviews: