2 Installation specifications for direct mounting
6
2.2
Brass screw connection
Preparing for installation
1. Fit the brass screw connection in the correct position on the temperature probe using a loosely
placed slotted pin.
2. Insert the back of the temperature probe into the assembly aid up to the limit stop (28 mm).
3. Press in the slotted pin until it is flush with the hexagonal surface (e.g., using a pair of pliers).
4. Remove the assembly aid.
(1)
Brass screw connection
(2)
Assembly aid (depth stop for screw connection installation)
(3)
Slotted pin
(4)
Assembly aid (for positioning the O-ring)
(3)
(1)
(4)
(2)