JUMO 00718766, Operating Manual, Page: 41 / 144

1 Brief description
5
1 Brief description
The dTRANS T06 Junior (type 707070) transmitter acquires the temperature through an RTD temperature probe with 2, 3, or 4-
wire circuit or thermocouple. Resistance transmitters with a 3-wire circuit, as well as DC voltage signals in the range from
0 to 1 V can also be connected for the measurement conversion.
The output signal is galvanically isolated from the measurement input and the voltage supply (triple isolation).
Depending on the measurement input, different linearization variants (linear, temperature-linear, or customer-specific) are pos-
sible. The variants 0(4) to 20 mA or 0(2) to 10 V are available as the output signal.
Process variables such as temperature or pressure are reliably emitted at the analog output and monitored for out of range.
If a malfunction occurs the transmitter sends a defined output signal according to the recommendation of NAMUR NE 43,
which downstream systems can recognize.
The operating statuses are signaled optically using a two-color LED (red, green).
Smooth operation is indicated by a permanent green LED; malfunction statuses are indicated by a permanent red LED.
Configuration of the device is only possible with the setup program.