5
4
Off
On
1600mm
30mm
1. The bottom of the wall bracket (2) should be 1.6m.
2. Do not position the wall heater directly above or below a power point or switch.
3. Mark and drill the 4 mounting holes for wall bracket (2) as noted below.
4. Using 4 suitable screws (not supplied) attach the wall bracket to the wall.
Note: If unsure what screws to use please discuss with your local hardware store.
5. Slide heater head onto wall bracket (2) and secure with thumbscrew (5)
and tighten fully.
Heater is now mounted and ready for use.
Wall Bracket assembly
