Jumbuck 4 Burner Hooded Comet BBQ, Operation Instruction Manual

Page: 17 / 26

16
CONNECTION TO LPG CYLINDER
LEAK TESTING
This should be done the first time you connect up the BBQ, and again each use. Always inspect the
hose before each use.
Connect the regulator to the LPG cylinder and tighten the connection.
Turn the gas on at the cylinder, or make sure gas is available to the BBQ, but do not turn the burners
on. This fills the gas lines with gas. Now brush or pour some soapy water onto all connections. If there
is a leak, bubbles should appear within about 20 seconds. If you find any leaks, tighten the connection
and repeat the leak test. If the leaks persist, contact your place of purchase.
POL QCC
DO NOT USE NAKED FLAME FOR LOCATING GAS LEAKS
IF A LEAK PERSISTS, CALL AN AUTHORISED PERSON
DO NOT USE THIS BBQ UNLESS ALL CONNECTIONS ARE GASTIGHT
In the case of a problem arising with the hose and regulator please contact your BBQ supplier for a list
of approved replacement parts.