Jumbuck 4 Burner Hooded Comet BBQ, Operation Instruction Manual

Page: 16 / 26

15
INSTALLATION
CUT OUT DIMENSIONS
The cut out must be made from non-combustible material only.
The 400mm tall, non-combustible rear surface is not necessary provided there is no combustible
material within 500mm of the rear of the BBQ.
If the BBQ is supplied with a duplicate data label, apply this label in the immediate vicinity of the
BBQ in an easily accessible area.
Combustion air openings are located at various locations around the firebox. The cutout dimensions
explained above must be met to ensure there is adequate space for entry of air for satisfactory
combustion.