Jumbo HV6188, Manual

Page: 19 / 49

D. Charging
How to take out and put in the accumulator:
1. First remove the connectors of the accumulator;
2. Remove the screws from the fixing board of the accumulator with a screwdriver;
3. Take out the accumulator;
4. Put in the new accumulator; fix with the fixing board again;
5. Connect the connectors of the accumulator according the manual and the diagram
of the product.
Note: This vehicle has a function of charging protection, and while it is being charged,
other functions can't be used at all.
•
The power must be turn off while the vehicle is being charged.
•
Before it was first put in use, the vehicle is supposed to be charged for 4-6 hours,
but never over 10 hours.
•
Please charge the vehicle when it runs much more slowly.
•
Please charge the vehicle for 8-12 hours each time after it has been used, but don't
charge it over 20 hours.
1. Insert the plug of the charger into the charging hole.
2. Insert the other plugs of the charger into the socket of power supply.
3. Never insert any metal articles into the charging hole so as to avoid the vehicle
being short-circuited and damaged.
4