Jumbo HV6188, Manual

Page: 17 / 49

C. Assembling steps
•
The vehicle must be assembled by adults, which needs about 10 minutes.
•
Tools needed: a screwdriver (prepared by yourself)
•
Don't let children touch or play the small components so as to avoid children being
choked
・
•
Please check the packing list before assembling. Deal with the plastic bags
properly and don't let children play the bags so as to avoid them being choked.
1. Install the training wheels
•
Flip the body up (people in the rear of the car)
•
Remove the screws on the vehicle
•
Installed wheels, screwed again.
2. In stall the left (right) the front
wheels
•
Flip the body up (people in car front)
•
On the front axle placed a
Φ
10 gasket first
•
Install the front wheel
•
Place a
Φ
10 gaskets, with nut attached
•
Then card wheel cover
3. Assembling the left
Flip the body up (people in the rear of the car)
In stall the rear wheel
Place a
Φ
10 gaskets, with nut attached
Then card wheel cover
Single (double) drive the left rear wheel
installation method
4. Assembling the right rear wheel
Flip the body up (people in the rear of the car)
On the rear axle placed a
Φ
10 gasket (single
drive installation requirements)
In stall the rear wheel
Place a
Φ
10 gaskets, with nut attached
Then card wheel cover
2